Step-by-Step Guide: How to Reset Your Garage Door Code

When Should You Reset a Garage Door Code?

There are a several reasons why you may want to reset your garage door code. Often this is one of the first tasks to do after moving. If you have recently moved into a home, you know the previous homeowners (and perhaps others) know your code. Or if you suspect someone else knows your current code, it’s a good idea to reset your garage door code.

Did you forget your code? With all the passwords we have to remember these days, it’s no surprise that many of us may forget our garage door code. This is especially true for those of us who rarely use the garage door keypad to enter.

3 Basic Steps to Resetting a Garage Door Code

Step 1: Locate the Programming Button

Every garage door opener has a programming button that allows you to reset the code. It is usually located on the back of the opener or on the wall-mounted control panel. Consult your garage door opener’s manual or check the manufacturer’s website if you are unsure about its location.

Step 2: Clear Existing Codes

To start fresh, clear any existing codes stored in the opener’s memory. Press and hold the programming button until the indicator light on the opener blinks or turns off, indicating that the codes have been cleared.

Step 3: Set a New Entry Code

Once the old codes are cleared, it’s time to set a new code. Decide on a memorable and secure code that is not easily guessed. Avoid using simple or repetitive numbers, such as 1234 or your birthdate. Then be sure to put this new garage door code somewhere secure that you can access again if you ever forget it.

To program the new garage door opener code, follow these steps:

1. Enter your new password (aka code) on the wall-mounted control panel or garage door keypad.
2. Locate the “Learn” button on the opener unit. This button is typically located near the programming button.
3. Press the “Learn” button and release it. The indicator light on the opener will begin flashing, indicating it is ready to receive the new code.
4. Enter the new code on the wall-mounted control panel or keypad within a specific time frame (usually 30 seconds). The opener will acknowledge the new code by flashing its indicator light or emitting a sound.

Step 4: Test the New Code

After programming the new code, test it to ensure it functions properly. Stand near the garage door opener and enter the new code on the wall-mounted control panel or keypad. The garage door should respond by opening or closing accordingly.

Step 5: Update Additional Remotes

If you have additional remote controls or keypads for your garage door opener, you’ll need to sync them with the new code. Refer to your opener’s manual for instructions on how to update the remotes. Typically, it involves pressing the “Learn” button on the opener and then pressing a button on the remote to sync them together.